Zinc Die Cast Scrap Saves
OLD ZINC DIE CAST SCRAP
Shall consist of miscellaneous old zinc base die castings, with or without iron and other foreign attachments. Must be free of borings, turnings, dross pieces, chunks, melted pieces and skimmings.
All unmeltables, dirt, foreign attachments, and volatile substances (such as rubber, cork, plastic, grease, etc.) are deductible. Material containing in excess of 30% iron will not constitute good delivery.
Zinc Die Cast Scrap Scope
NEW PLATED ZINC DIE CAST SCRAP
Shall consist of new or unused clean, plated zinc base die castings, free from corrosion.
Zinc Die Cast Scrap Scrub
HOT DIP GALVANIZERS SLAB ZINC DROSS (BATCH PROCESS)
Shall consist only of galvanizers unsweated zinc dross in slab form from hot dip galvanizing (Batch Process) with a minimum zinc content of 92% and shall be free of skimmings and tramp iron.
Broken pieces under 2`` in diameter shall not exceed 10% of the weight of each shipment. Slabs shall not weigh over 90 pounds each, heavier pieces acceptable upon mutual agreement between buyer and seller. Material from continuous galvanizing operation is not acceptable. Blocks are acceptable upon mutual agreement.